Temporary holding patch
[digispeaker-kernel.git] / arch / powerpc / boot / dts / pcm030.dts
1 /*
2  * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
3  *
4  * Copyright 2006 Pengutronix
5  * Sascha Hauer <s.hauer@pengutronix.de>
6  * Copyright 2007 Pengutronix
7  * Juergen Beisert <j.beisert@pengutronix.de>
8  *
9  * This program is free software; you can redistribute  it and/or modify it
10  * under  the terms of  the GNU General  Public License as published by the
11  * Free Software Foundation;  either version 2 of the  License, or (at your
12  * option) any later version.
13  */
14
15 /dts-v1/;
16
17 / {
18         model = "phytec,pcm030";
19         compatible = "phytec,pcm030";
20         #address-cells = <1>;
21         #size-cells = <1>;
22         interrupt-parent = <&mpc5200_pic>;
23
24         cpus {
25                 #address-cells = <1>;
26                 #size-cells = <0>;
27
28                 PowerPC,5200@0 {
29                         device_type = "cpu";
30                         reg = <0>;
31                         d-cache-line-size = <32>;
32                         i-cache-line-size = <32>;
33                         d-cache-size = <0x4000>;        // L1, 16K
34                         i-cache-size = <0x4000>;        // L1, 16K
35                         timebase-frequency = <0>;       // from bootloader
36                         bus-frequency = <0>;            // from bootloader
37                         clock-frequency = <0>;          // from bootloader
38                 };
39         };
40
41         memory {
42                 device_type = "memory";
43                 reg = <0x00000000 0x04000000>;  // 64MB
44         };
45
46         soc5200@f0000000 {
47                 #address-cells = <1>;
48                 #size-cells = <1>;
49                 compatible = "fsl,mpc5200b-immr";
50                 ranges = <0 0xf0000000 0x0000c000>;
51                 bus-frequency = <0>;            // from bootloader
52                 system-frequency = <0>;         // from bootloader
53
54                 cdm@200 {
55                         compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
56                         reg = <0x200 0x38>;
57                 };
58
59                 mpc5200_pic: interrupt-controller@500 {
60                         // 5200 interrupts are encoded into two levels;
61                         interrupt-controller;
62                         #interrupt-cells = <3>;
63                         compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
64                         reg = <0x500 0x80>;
65                 };
66
67                 timer@600 {     // General Purpose Timer
68                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
69                         reg = <0x600 0x10>;
70                         interrupts = <1 9 0>;
71                         fsl,has-wdt;
72                 };
73
74                 timer@610 {     // General Purpose Timer
75                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
76                         reg = <0x610 0x10>;
77                         interrupts = <1 10 0>;
78                 };
79
80                 gpt2: timer@620 {       // General Purpose Timer in GPIO mode
81                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
82                         reg = <0x620 0x10>;
83                         interrupts = <1 11 0>;
84                         gpio-controller;
85                         #gpio-cells = <2>;
86                 };
87
88                 gpt3: timer@630 {       // General Purpose Timer in GPIO mode
89                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
90                         reg = <0x630 0x10>;
91                         interrupts = <1 12 0>;
92                         gpio-controller;
93                         #gpio-cells = <2>;
94                 };
95
96                 gpt4: timer@640 {       // General Purpose Timer in GPIO mode
97                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
98                         reg = <0x640 0x10>;
99                         interrupts = <1 13 0>;
100                         gpio-controller;
101                         #gpio-cells = <2>;
102                 };
103
104                 gpt5: timer@650 {       // General Purpose Timer in GPIO mode
105                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
106                         reg = <0x650 0x10>;
107                         interrupts = <1 14 0>;
108                         gpio-controller;
109                         #gpio-cells = <2>;
110                 };
111
112                 gpt6: timer@660 {       // General Purpose Timer in GPIO mode
113                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
114                         reg = <0x660 0x10>;
115                         interrupts = <1 15 0>;
116                         gpio-controller;
117                         #gpio-cells = <2>;
118                 };
119
120                 gpt7: timer@670 {       // General Purpose Timer in GPIO mode
121                         compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
122                         reg = <0x670 0x10>;
123                         interrupts = <1 16 0>;
124                         gpio-controller;
125                         #gpio-cells = <2>;
126                 };
127
128                 rtc@800 {       // Real time clock
129                         compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
130                         reg = <0x800 0x100>;
131                         interrupts = <1 5 0 1 6 0>;
132                 };
133
134                 can@900 {
135                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
136                         interrupts = <2 17 0>;
137                         reg = <0x900 0x80>;
138                 };
139
140                 can@980 {
141                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
142                         interrupts = <2 18 0>;
143                         reg = <0x980 0x80>;
144                 };
145
146                 gpio_simple: gpio@b00 {
147                         compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
148                         reg = <0xb00 0x40>;
149                         interrupts = <1 7 0>;
150                         gpio-controller;
151                         #gpio-cells = <2>;
152                 };
153
154                 gpio_wkup: gpio@c00 {
155                         compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
156                         reg = <0xc00 0x40>;
157                         interrupts = <1 8 0 0 3 0>;
158                         gpio-controller;
159                         #gpio-cells = <2>;
160                 };
161
162                 spi@f00 {
163                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
164                         reg = <0xf00 0x20>;
165                         interrupts = <2 13 0 2 14 0>;
166                 };
167
168                 usb@1000 {
169                         compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
170                         reg = <0x1000 0xff>;
171                         interrupts = <2 6 0>;
172                 };
173
174                 dma-controller@1200 {
175                         compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
176                         reg = <0x1200 0x80>;
177                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
178                                       3 4 0  3 5 0  3 6 0  3 7 0
179                                       3 8 0  3 9 0  3 10 0  3 11 0
180                                       3 12 0  3 13 0  3 14 0  3 15 0>;
181                 };
182
183                 xlb@1f00 {
184                         compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
185                         reg = <0x1f00 0x100>;
186                 };
187
188                 ac97@2000 { /* PSC1 in ac97 mode */
189                         compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
190                         cell-index = <0>;
191                         reg = <0x2000 0x100>;
192                         interrupts = <2 1 0>;
193                 };
194
195                 /* PSC2 port is used by CAN1/2 */
196
197                 serial@2400 { /* PSC3 in UART mode */
198                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
199                         cell-index = <2>;
200                         reg = <0x2400 0x100>;
201                         interrupts = <2 3 0>;
202                 };
203
204                 /* PSC4 is ??? */
205
206                 /* PSC5 is ??? */
207
208                 serial@2c00 { /* PSC6 in UART mode */
209                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
210                         cell-index = <5>;
211                         reg = <0x2c00 0x100>;
212                         interrupts = <2 4 0>;
213                 };
214
215                 ethernet@3000 {
216                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
217                         reg = <0x3000 0x400>;
218                         local-mac-address = [ 00 00 00 00 00 00 ];
219                         interrupts = <2 5 0>;
220                         phy-handle = <&phy0>;
221                 };
222
223                 mdio@3000 {
224                         #address-cells = <1>;
225                         #size-cells = <0>;
226                         compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
227                         reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
228                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
229
230                         phy0: ethernet-phy@0 {
231                                 reg = <0>;
232                         };
233                 };
234
235                 ata@3a00 {
236                         compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
237                         reg = <0x3a00 0x100>;
238                         interrupts = <2 7 0>;
239                 };
240
241                 i2c@3d00 {
242                         #address-cells = <1>;
243                         #size-cells = <0>;
244                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
245                         reg = <0x3d00 0x40>;
246                         interrupts = <2 15 0>;
247                         fsl5200-clocking;
248                 };
249
250                 i2c@3d40 {
251                         #address-cells = <1>;
252                         #size-cells = <0>;
253                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
254                         reg = <0x3d40 0x40>;
255                         interrupts = <2 16 0>;
256                         fsl5200-clocking;
257                         rtc@51 {
258                                 compatible = "nxp,pcf8563";
259                                 reg = <0x51>;
260                         };
261                         eeprom@52 {
262                                 compatible = "catalyst,24c32";
263                                 reg = <0x52>;
264                         };
265                 };
266
267                 sram@8000 {
268                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
269                         reg = <0x8000 0x4000>;
270                 };
271         };
272
273         pci@f0000d00 {
274                 #interrupt-cells = <1>;
275                 #size-cells = <2>;
276                 #address-cells = <3>;
277                 device_type = "pci";
278                 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
279                 reg = <0xf0000d00 0x100>;
280                 interrupt-map-mask = <0xf800 0 0 7>;
281                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
282                                  0xc000 0 0 2 &mpc5200_pic 1 1 3
283                                  0xc000 0 0 3 &mpc5200_pic 1 2 3
284                                  0xc000 0 0 4 &mpc5200_pic 1 3 3
285
286                                  0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
287                                  0xc800 0 0 2 &mpc5200_pic 1 2 3
288                                  0xc800 0 0 3 &mpc5200_pic 1 3 3
289                                  0xc800 0 0 4 &mpc5200_pic 0 0 3>;
290                 clock-frequency = <0>; // From boot loader
291                 interrupts = <2 8 0 2 9 0 2 10 0>;
292                 bus-range = <0 0>;
293                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
294                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
295                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
296         };
297 };